Camera moves and end frames
Pick one camera move per shot, describe it in plain camera terms, and use start and end frames for control.
Name the move, not the vibe
Words like cinematic or epic do not tell Kling what the camera should do. Use real direction terms: push in, pull back, pan, tilt, track, orbit or static. Add speed and stability cues such as slow or steady, and say where the shot starts and ends, for example from a medium shot to a close-up on the hands.
Match the move to the job
A push-in draws attention to a face, a product or a key detail, so it suits hooks and product clips. Keep the subject's own action simple during a push-in. A pull-back reveals the setting, which works for a payoff or a location reveal, as long as that setting is clearly defined. A pan follows action or connects two subjects; avoid panning against a subject moving fast in the other direction. A tilt shows height or moves from one detail to another, and works best when the scene has a clear top and bottom.
One move per shot
Stacking several camera moves in one clip, or mixing contradictions such as a static camera with a fast push-in, gives messy results. If you need more, plan several short shots, give each one a single job, and cut them together in your editor.
Lock both ends with start and end frames
In Image to Video you can add an end frame, and Kling generates the motion between your two images. Because both ends are fixed, this is one of the most controllable ways to get a transition. Use two images with the same subject and theme; if they differ too much, the model may jump to a new shot instead of moving smoothly. Kling notes that many users first create matching images with an image generator, then use them as the two frames.
Expect to iterate
Results vary between runs. Higher resolution keeps more detail during movement but will not save a weak prompt.